7*24 Hour working hours all the time
SH708 chemiluminescence nitrogen tester using chemiluminescence method to determine the total nitrogen content, improve the ability of anti-impurity interference, avoid the electric quantity method of titration cell lock operation and thus bring unstable factors, so that th...
SH120 automatic four ball machine grease wear resistance tester is in the form of sliding friction, under the condition of extremely high point contact pressure, mainly used to evaluate the bearing capacity of lubricants. In practical application, different evaluation indexes can be...
SH112C automatic kinematic viscometer is designed and manufactured in strict accordance with GB / T265 and astmd445 standards. It can measure the kinematic viscosity of transparent and opaque liquids to the same accuracy, including crude oil, light fuel oil, lubricating oil, ...
SH126 lubricating oil foam tester conforms to GB/T12579,ASTMD892 method requirements. It is suitable for testing the foam tendency and foam stability of lubricating oil under the standard conditions.
SH119 petroleum product ash tester is designed and manufactured according to GB/T508, GB/T2433, SH/T0067 ASTM D482 standards. It is used for the determination of ash content of oil products and lubricating grease sulfate.
SH708 chemiluminescence nitrogen tester using chemiluminescence method to determine the total nitrogen content, improve the ability of anti-impurity interference, avoid the electric quantity method of titration cell lock operation and thus bring unstable factors, so that the sensitivit...
ST203C automatic congealing temperature tester is designed and manufactured according to the general rule 0613 of The Chinese Pharmacopoeia in 2020 and USP41 651 congealing temperature.
ST-63 fully automatic activated carbon ignition point tester is suitable for measuring the ignition point of activated carbon. It is designed and manufactured in accordance with the standard GB/T7702.9 "Test Methods for Coal Granular Activated Carbon - Determination of ignition p...
SD8022 Lubricating Oil Demulsibility Characteristics Tester is suitable for measuring the ability of oil and water to separate in medium and high viscosity lubricating oils. Lubricating oil anti emulsification tester complies with GB/T8022. ASTM D2711
SH120 automatic four ball machine grease wear resistance tester is in the form of sliding friction, under the condition of extremely high point contact pressure, mainly used to evaluate the bearing capacity of lubricants.
SH0193C automatic rotating oxygen bomb tester is designed and manufactured according to the national standard ASTMD2272-2009 "Lubricating oil oxidation stability determination method" metal bath standard.
SH126C engine coolant foam tendency tester is designed according to the requirements of the People's Republic of China petrochemical industry standard SH/T0066 "engine cooling foam determination method", suitable for the determination of diluted or concentrated engine coolant foam...
Oil product smoke point tester is designed and manufactured according to GB/T382 "kerosene smoke point determination method" standard provisions. For the determination of the smoke point of kerosene and jet fuel for lamps, that is, the maximum height of a smokeless fl...
SH128 automatic antifreeze freezing point tester/ jet fuel freezing point tester is based on the national petrochemical industry standard SH/T0090-91 "engine coolant freezing point determination method" and ASTM D1177 & ASTM D2386.
SH123 automatic liquid phase rust tester is designed in strict accordance with GB / T11143 standard, and is first used to evaluate the determination of adding inhibitor mineral oil and turbine oil during water mixing; the liquid phase rust tester is equally suitable for the determinat...
